Shop TWG Pullmaster PL5 Hoists

The TWG Pullmaster PL5 is a high performance, high efficiency planetary winch, having equal speed in both directions. The cable drum of this unit conforms with OSHA recommendations making this winch especially suitable for application where a load is raised and lowered.


The TWG Pullmaster PL5 is powered by a hydraulic gear motor and a reduction ratio of 39:1 is established by two planetary stages. The automatic, multi-disc brake is spring applied - pressure released. An over-running clutch, between the motor shaft and the brake assembly, permits free rotation in the “Hoisting” direction without affecting the brake. During “Lowering” operation the over-running clutch locks, causing the brake discs to rotate between a series of divider discs. Dynamic braking is then achieved by modulation of the winch control valve handle. When the control is returned to neutral position the brake applies automatically. A counter-balance valve is not required for smooth and positive “Down” control of the Model PL5 planetary winch. During lowering of a load the temperature generated by the disc brake is dissipated by a flow of hydraulic fluid supplied from the hydraulic motor. This circulation flow is vented internally, thus there is no need for an external vent line. 

TWG Pullmaster now incorporates the use of heavy duty stainless steel rings on all drum seal surfaces for prolonged seal life. All moving parts of the TWG Pullmaster PL5 planetary winch are totally enclosed and run in an oil bath. Anti-friction bearings are used on all turning components, assuring long, trouble free service with a minimum requirement for maintenance.

Style:

Type:

Cable Drum Dimensions (Standard Drum):

Cable Storage Capacity:





Max Operating Pressure:

Max Operating Volume:

Minimum Operating Volume:

Drum Torque at Max Pressure:

Drum RPM at Max Volume:

Line Pull at Maximum Pressure:

Line Speed at Maximum Pressure:

Allowed Back Pressure @ Motor Return Port:

Allowed Pressure at Brake Housing Safety Vlv:

View the Catalog:





View the Collection:

Planetary Hoists

Equal Speed in Both Directions

7.38" Barrel Diameter, 11" Flange Diameter, 6.56" Barrel Length

1/4" Wire Rope = 348ft

5/16" Wire Rope = 218ft

3/8" Wire Rope = 157ft

7/16" Wire Rope = 110ft

1/2" Wire Rope = 100ft

2000 psi (138 bar)

14.5 GPM (55 l/min) 

6 GPM (23 l/min) 

22,500 lb-in (2542 Nm)

35

4500lb Bare Drum, 3328lb Full Drum

135fpm Bare Drum, 185fpm Full Drum

65psi

100psi

Click HERE to view the Pullmaster PL Hoist Brochure

Click HERE to view the Pullmaster PL Hoist Specs & Drawings

Click HERE to view the Pullmaster PL Performance Chart Data

Click HERE to view the Pullmaster PL5 Sales Sheet

Click HERE to view the Pullmaster PL5 Service Manual

Click HERE to view the entire PL Winch Bumper Winch Collection

Shop Pullmaster PL5 Planetary Hoists


Click on the model number in the chart below to view that item. Options show below are most common and readily available.
Don't see what you need? Ask our technical team for a unit fit for your application!

Product SKU Model Code Drum Rotation Drum Flange Diameter Drum Length Brake Option Lead Time Price
71212 PL5-12-210-1 Counterclockwide 9" 5.25" Automatic Brake 10-11 Weeks $4,472.27
71214 PL5-12-210-2 Counterclockwide 12.38" 6.56" Automatic Brake 10-11 Weeks $5,672.99
71215 PL5-12-210-6 Counterclockwide 11" 10" Automatic Brake 10-11 Weeks $6,052.99
71228 PL5-12-211-1 Counterclockwide 9" 5.25" Automatic Brake 10-11 Weeks $4,560.99
71251 PL5-12-213-1 Counterclockwide 9" 5.25" Automatic Brake 10-11 Weeks $4,884.99
71257 PL5-12-213-2 Counterclockwide 12.38" 6.56" Automatic Brake 10-11 Weeks $5,194.42
71234 PL5-14-211-1 Clockwise 9" 5.25" Automatic Brake 10-11 Weeks $4,560.99
71265 PL5-15-210-2 Clockwise 12.38" 6.56" Automatic Brake 10-11 Weeks $5,673.99
71236 PL5-15-211-1 Clockwise 9" 5.25" Automatic Brake 10-11 Weeks $4,560.99

  • NOTE: Drum Storage based on Ø3/8" wire rope.

Standard cable anchor is suitable for 1/4 - 3/8 inch diameter wire rope. For safety, 5 wraps of wire rope must be maintained at all times. 


PullMaster products are not to be used to lift, hoist or move people. If your task involves lifting or moving people, you MUST use the proper equipment; not a PullMaster product. Wire rope anchors on winches are not designed to hold the rated load of the winch. You must keep at least five (5) wraps of wire rope on the drum to insure the wire rope doesn't come loose. Stay clear of suspended loads and of wire rope under tension. A broken wire rope or dropped load can cause serious injury or death. Make sure that all equipment, including the winch and wire rope, is maintained properly. Avoid shock loads. This type of load imposes a strain on a winch many times the actual weight of the load and can cause failure of the wire rope or of the winch. Winch operators must be trained in the proper, safe operations of the winch. The hydraulic system should use only high quality hydraulic oils from reputable suppliers. These oils should contain additives to prevent foaming and oxidation in the system. All winch systems should be equipped with a return line filter capable of filtering 10-micron particles from the system. Please contact OneHydraulics if you need assistance with fluid selection.


Technical Specs




Still need help? Give us a call at 281.941.2310 or email us at sales@onehydraulics.com for technical support.